4 Channels CWDM MUX/DEMUX, 1270nm to 1330nm, Monitor Port, 1550nm Port, IL=2.0dB, LC

Multiplexer (MUX) and demultiplexer (DEMUX) are combined together into a single piece of equipment for bi-directional data transmission over two fibers.

FiberOnSale CWDM Mux/Demux is a passive technology, it allows for any protocol to be transported over the link, as long as it is at a specific wavelength (i.e. T1 over fiber at 1570nm transported alongside 10Gbps Ethernet at 1590nm). This allows for long-term future proofing of the networking infrastructure because the multiplexers simply refract light at any network speed, regardless of the protocol being deployed.
FiberOnSale provides a complete portfolio of CWDM Mux Demux and Optical Add Drop Multiplexer (OADM) units to suit all applications such as: Gigabit & 10G Ethernet, SDH/SONET, ATM, ESCON, Fibre Channel, FTTx and CATV. And we provide optional port configurations such as: Express Port, Monitor Port, 1310nm passband port and 1550nm port for these multiplexers according to customer choice.

Front Panel Details

Wavegate front panel detaild example

A. Common port:
● LC, SC, ST and FC connectors available.

B. Standard port 1310nm:
● Allows a legacy 1310nm signal to pass. That is to say, it can carry LR optics, LX optics etc.
● LC, SC, ST and FC connectors available.

C. Standard port 1550nm:
● Allows a legacy 1550nm signal to pass. That is to say, it can carry ER optics, ZR optics, LX optics, ZX optics etc.
● LC, SC, ST and FC connectors available.

D. Mux/Demux port for specific wavelengths:
● LC, SC, ST and FC connectors available.
● Compliant with the ITU G.657A1 standard as default.

E. Express port:
● Enables the cascading of two CWDM MUX/DEMUX modules, doubling the channel capacity on the common fiber link.
● Channel Isolation is 15dB as default, 16dB ~40dB available on request.
● LC, SC, ST and FC connectors available.

F. Monitor port:
● Connects measurement/monitoring equipment, such as power meters or network analyzers, to the module outputs.
● When finished monitoring, disconnect the instruments and the network is left undisturbed.
● LC, SC, ST and FC connectors available.
● Tap percentage is 5% as default, 1%, 2%, 3%, or 10% available on request.

NOTE:
● Actual layout depends on the chosen connector type as well as other factors. However, the principal scheme stays the same
● We provide optional port configurations such as: Express Port, Monitor Port, 1310nm passband port and 1550nm port for these multiplexers according to customer choice, need more details, please contact at info@FiberOnSale.com
● When using with 1310nm legacy SDH/SONET, CWDM wavelengths 1270, 1290, 1310, 1330 and 1350nm should not be used.
● When using with 1550nm legacy SDN/SONET, CWDM wavelengths 1510, 1530, 1550, 1570 and 1590nm should not be used.

Item Details

● 4 channels CWDM mux and demux in one 1U Rack
● Com port is duplex
● 1U 19 inch Rack Mount Housing
● It is equipped with configuration ports like Monitor, Express port according to customer choice (see options)
● Front panel is equipped with adapters according to customer choice (see options)
● Passive, no electric power required. (MTBF ca. 500 years)
● Low insertion loss
● Simple to install, requires no configuration or maintenance
● ISO 9001 manufacturing facility

Mechanical Details for Housing

Note: Please, note that the drawings shown here only show the dimensions and do not the specific configuration of the module.

Specification

Parameters	Unit	CWDM Module
Wavelength Range	nm	1260 ~ 1620
Channel Center Wavelength	nm	1270 / 1290 / … / 1610 or 1271 / 1291 / … /1611
Channel Spacing	nm	20
Channel Passband	nm	λc ± 7.5
Channel No.	λ	2	4	8	16	18
Insertion Loss	dB	≤0.8	≤1.5	≤2.5	≤5.2	≤6.4
Adjacent Channel Isolation	dB	≥ 30
Non-adjacent Channel Isolation	dB	≥ 40
Wavelength thermal stability	nm/℃	≤ 0.003
Insertion loss thermal stability	dB/℃	≤ 0.005			≤ 0.007	≤ 0.008
PDL	dB	≤ 0.1	≤0.15	≤ 0.15	≤ 0.20	≤ 0.25
Polarization mode dispersion	ps	≤ 0.1			≤ 0.15
Directivity	dB	≥ 50
Return loss	dB	≥ 45
Optical Power	mW	≤ 500
Operating Temperature	℃	-10 ~ +70
Storage Temperature	℃	-40 ~ +85
Relative Humidity	%	5 ~ 95
Dimension		ABS Box or LGX Box or 1U(2U) Rackmount
Note: 1. Customization is available. 2. We can make low insertion loss solution as well. For more information, please feel free to contact at info@fiberonsale.com. 3. Specified without connector, and add an additional 0.2dB loss per connector.